RELY-REC: Version Control & Updates
/RELY-REC: Version Control & Updates
RELY-REC: Version Control & Updates 2020-10-20T17:40:15+02:00

Warning: before applying an update, make sure that the part number of the device corresponds to the part number of the fix/upgrade downloaded and check that the corresponding firmware version is running in the equipment. Fix first numbers (XX.X.Y) and firmware version (XX.X) must match. Note that fix is cumulative and includes previous fixes available for the same firmware version.

CAUTION: when upgrading a system, the device’s memory may be completly flashed. Make sure that power remains on and that there are no interruptions until the process is completed. Note that upgrading process might take 30 minutes.

Version ControlReleased dateDescriptionP/NUpgrade linkCompatibilityFixFix CompatibilityNotes
17.0701/07/2017Initial version3513N/AN/AN/AN/A
18.0101/01/2018New features:
- NTP synchronization & PTP synchronization selectable
- Port mirroring recording
- VLAN tag recording
3513N/AN/AN/AN/A
18.0401/07/2018New features:
- Complete IP/Port configuration through Webmanager
- User Guide downloadable through Webmanager
3513N/AN/AN/AN/A
19.101/07/2019New features: Trigger recording with pre-trigger and post-trigger configuration
Event management:
- trigger definition based on conditions (alarm inputs, programmable recording, packet monitor, etc.)
- different action configurable (recording, SNMP trap, systlog message, alarm output, etc.)
- Filtering configuration
- Records management
3513-XCXB-0-AN/AN/Afix_rely_rec_19.1.519.1.X
20.101/01/2020New features:
- Secure upgrade
- SFP autoconfiguration
- Link status monitor
- SNMP Trap: link down, link up, alarm
- Network Node Table feature for HSR/PRP:
- Missing frames
- Wrong LAN frames
3513-XCXX-0-A-1N/AN/ABased on Recovery mode hardware design
3513-XCXB-0-A-1N/AN/Afix_rely_rec_20.1.120.1.XBased on Recovery mode hardware design
20.215/12/2020New features:
- SFP monitoring feature (DDMI)
- Configuration control at firmware update
- GOOSE based trigger
- SNMP trap monitoring
3513Request Relyum Support19.1, 20.1